1. Keep the confidential documents filed well and make sure the related confidential information controlled under the responsibilities; 做好保密文件的歸檔工作，確保相關保密信息在職責范圍內得到控制; 2. To strictly follow existing safety procedures of the company for the contractors within the scope of supervision監管責任范圍內的承包商嚴格遵守公司現行的安全制度. 3. More safety supervision on contractors who working in routine tasks給予所管轄承包商更多的日常工作安全監管. 4. To ensure zero LTIR and TRIR of maintenance personnel and contractors in own area確保區域內維修人員和外部承包商零可記錄人員傷害事故和零損時傷害記錄. 5. Maintenance personnel must obey the work arrangement of personnel above the deputy team leader 維修人員服從副班長及以上人員工作安排；
6. Do a good job in patrol inspection of equipment and make patrol inspection records. Check all kinds of equipment for running out, emitting, dripping and leaking, if any problem is found, fasten it in time. Problems that cannot be handled shall be recorded and reported in time. 認真做好設備的巡回檢查，做好巡檢記錄。 檢查各類設備跑、冒、滴、漏，發現問題、及時緊固處理；
不能處理的問題，做好記錄及時上報；
7. The maintenance personnel must have the relevant work permit issued by the production personnel and wear all kinds of labor protection and safety protection equipment before entering the production plant. Clean up the site after safety maintenance and close the work ticket in time. 維修人員進入生產裝置作業必須有生產人員開具的相關作業許可證，佩帶好各類勞動保?br> ず桶踩闌び鎂擼?br> 安全維修結束后清理現場?br>笆憊乇兆饕燈保?br> 8. After the maintenance of the rotating equipment, the test run shall be carried out together with the operator, and the maintenance can be completed only after the equipment is signed and confirmed to be qualified. 動設備檢修后要與操作人員一起試運轉，簽字確認合格后檢修工作方可結束；
9. After the maintenance task is completed, the maintenance worker shall fill in the maintenance record in time (including damaged parts, name and quantity of replaced parts, name and date of maintenance personnel, the maintenance measures, methods, etc. ) , and shall be signed by the shift leader for approval. 維修工在完成檢修任務后，應及時填寫檢修記錄（包括損壞部件、更換部件名稱、數量、檢修人姓名、檢修日期及維修措施、方法等項），而且須班長簽字認可。 10. After the repair, the maintenance personnel shall immediately submit the complete work ticket to the shift leader for summary and filing. 維修人員在修理完畢后，應立即將完整的作業票交由班長匯總備案。 11. Other tasks assigned by the Shift Leader完成班長安排的其他任務。
